In automotive circuits, automotive relays are crucial control components, ensuring the normal operation and safety of the vehicle. They not only control various vehicle functions but are also a key link in ensuring safe driving. Choosing the right automotive relay can not only enhance your car's appearance but also play a vital role in critical moments.
Automotive interiors are also equipped with devices similar to switches-relays.
Next, when selecting an automotive relay, input and output parameters, as well as environmental and safety factors, must be considered to meet the vehicle's usage requirements. During the selection process, we must comprehensively consider multiple aspects such as input parameters, output parameters, timing parameters, environmental conditions, and safety regulations to ensure that the selected relay is perfectly matched and performs its intended function.
When selecting an automotive relay, we need to consider several key factors to ensure the normal operation and safety of the vehicle.
Input Parameter Selection Principles
► Basic Parameter Focus
When selecting an automotive relay, we need to focus on input parameters such as coil rated voltage, operating voltage, release voltage, coil power consumption, maximum continuous current, and coil resistance. During the selection process, we should ensure that these parameters match the actual needs to guarantee the normal operation of the relay.
► Ambient Temperature Influence
The operating parameters of relays vary under different temperature environments, requiring careful attention. Automotive relays typically operate in the engine compartment and passenger compartment environments, with maximum temperature limits of 125°C and 85°C respectively. It's important to note that coil resistance changes with ambient temperature, affecting the relay's pull-in and release voltages.
► Voltage and Power Consumption Considerations
High operating voltage designs must consider the impact of temperature rise on the coil. To meet low operating voltage requirements, automotive relays are often designed with higher power consumption. However, the voltage applied to the coil for extended periods must be controlled within 120% of the rated voltage. Especially in high-temperature environments, the coil temperature rises rapidly, accelerating its aging process.
► Release Voltage Setting
The release voltage of both DC and AC relays must be within the set range. If the residual voltage on the circuit exceeds this range, the relay will fail to release properly.
► Back EMF and Protection Measures
Selecting suitable components such as resistors or freewheeling diodes can reduce the impact of back EMF. To avoid damage to electronic circuits from back EMF, relays equipped with resistors or freewheeling diodes can be selected, but the correct power supply polarity configuration must be ensured.
Output Parameter Selection Principles
► Contact Type and Load
When selecting automotive relays, multiple output parameters must be considered comprehensively, including the number of contact groups, contact type, contact load, contact material, electrical life, and mechanical life. These parameters directly affect the relay's performance and effectiveness. The contact type is selected based on the specific application, affecting the circuit control effect.
► Different Types of Loads
Relays should have specific handling measures for different loads to avoid contact damage. Different types of loads will have different effects on the contacts. For example, lamp loads will generate inrush current; motor loads will generate back EMF; inductive loads will generate electromagnetic induction surges, etc. In practical applications, special attention needs to be paid to the characteristics of the load type, and corresponding measures should be taken to protect the contacts.
► Contact Material and Protection
Contact materials should have characteristics such as low contact resistance and corrosion resistance. When selecting relay contact materials, ensure that the contact resistance remains low and stable, and that they possess good corrosion resistance and anti-adhesion properties.
Time and Environmental Condition Selection
► Key Time Parameters
When selecting relays, time parameters such as operating time have little impact on automotive relays, but for combination relays, flashing frequency needs to be considered. While operating time is generally not a primary concern for automotive relays, flashing frequency and delay time become major considerations for combination relays.
► Environmental Condition Handling
Relays need to withstand high temperatures and humid conditions, requiring a sealed design. When selecting relays, we must fully consider the various environmental conditions they will face, such as high temperature, low temperature, and humid conditions. High temperature and humid environments, in particular, may accelerate relay aging; selecting a sealed design can effectively protect its performance stability.